Turn it on to "Smoke" mode and use the P settings, or cook mode by selecting a temperature. When you select smoke or a temp setting you start the ignition sequence. The fan, igniter and auger motor turn on. The fan stays on until the smoker is turned off. The auger motor continuously delivers pellets to the red hot igniter rod in the firebox for two minutes under normal conditions. Then the igniter rod shuts off and the pellet fire burns with only the assistance of the auger and the fan.
So that brings me to the one thing I have learned in all this that I basically read when I was getting started. One of the biggest keys is “Temperature Control”! If you want consistent food make sure you get that under control. It is the key to solid consistent food! Once you get your food consistent you can experiment with a lot of other things. But if you can’t get that down, you will always be looking for another magic bullet. The number one magic is temperature!
PID: For the most precise temperature control, some pitmasters feel that a grill with a proportional-integrative-derivative (PID) controller is the way to go. A PID controller uses algorithms to keep the temperature within a couple of degrees of the setting. It doesn’t use fixed cycles to release the pellets. Instead, the controller only adds pellets when it’s necessary to maintain the desired temperature.
With 341 square inches of cooking space and a digital control board that sets the temperature from 180 to 500 degrees, you’ll be cooking whole meals in this grill, even though it’s the smallest model that Pit Boss makes. It will hold up to a dozen burgers for parties, or a chicken and vegetables for the family dinner. When cooking is done, the porcelain coated grill grates are easy to clean.
×