It's true that even the entry-level models of pellet smokers are a bit pricey. But I've never met an unhappy pellet smoker owner, even if they paid a few hundred bucks more than the cost of their neighbor's grill. And manufacturers are rising to meet increased consumer demand, with more selections, more features, and more competitive pricing. While many folks struggle trying to get cheap offset and bullet smokers to work, with a pellet smoker, it's easy to make the best smoked ribs, brisket, and pulled pork in the neighborhood.

Right off the bat I could tell this smoker was made in America! While putting it together the holes actually matched up! ATBBQ- beat the 5-6 week lead time and delivered in two weeks out to California. This thing is a beast- the heavy weight I was looking for in a smoker and it has the most consistent temp I have ever had with a pellet grill. I messed up on the first pellet grill that starts with a "T" and should have started out with the Yoder YS640. If you are on the fence or wondering if it's truly worth the cash. All I can say is yes...YES it is. Pull the trigger and order this now- you won't be disappointed. I don't work for Yoder or ATBBQ- I'm just a experienced BBQ'r that could not be happier! Thanks Yoder and ATBBQ,

Hey Charlie – I’d leave that grate wide open if you want maximum heat. If the grates are only over the burn pot, then you can do sort of a two zone cook (indirect vs direct heat) by putting a thicker steak, chop, or piece of chicken on the ‘non direct’ side to get up to a temp that’s 15 or 20 degrees lower than your target. Then, finish off over the burn pot area. Just one idea.
Meanwhile, it also has a 15-pound pellet capacity comparable to Camp Chef SmokePro (not as large but big enough to eliminate continuous wood pellet refills) and folding legs for better portability. However, certain users who’ve already bought their own REC TEC Grills Mini Portable Pellet Grill have complaints about it, like inconsistent heat distribution of the grill and poor quality control (certain grills break down easily).
Third, we’re experienced: We have burnt our foods and fingers; and while we were at it, we learned from our mistakes. In doing so, we’ve managed to become the best and mastered the art to perfection. So, we went through the same learning curves that you did or might do. So, we’re aware of the things that matter and we’re going to impart that knowledge with you, so that you don’t make the same mistakes as us.
Hey Jimmy, thanks for commenting here about your experience. I’m sorry to hear your experience was less than optimal. I have only cooked on the Traeger pro models. I do know that it is good practice to vacuum out the burn pot after cooks of a few hours or more. Not sure this was where your problems were initiated. Did you contact Traeger support? If so, what was their response?

Remember, you are paying for every little feature, attachments and details on any product. So do not end up paying you inheritance for a feature that you are probably never going to use. Instead, invest on a pellet grill that caters to your needs and has features that will actually enhance your experience when using it. So do not, I repeat: do not, fall for fancy marketing features that sound too drastic.


It comes with some unique features, such as its proprietary “Sense-mate” technology that uses a thermal sensor to monitor the ambient temperature. If used in a cold weather, this grill fires up the turbo mode so you won’t have to wait for it to heat up before you start using it. It comes with “fan-only” mode to blow off the ash and automatically clean the grill once it has been shut off.
Pellets not Lighting: It’s a simple issue. There is a problem either with the connection of your lighting rod or a damaged system. Repairing the wiring, if that’s where the problem is, might be a little complicated for most. So, for the average griller, the best and the easiest option is to replace the lighting mechanism altogether. When you buy the replacement part, it will come with a detailed instruction manual that anyone can follow.
Extremely high build quality. It's heavy. Solid. Nothing flexes or bends. The temp displayed is very accurate when referenced with a thermometer. My only complaint is that the 2-piece diffuser should either be standard equipment, or an optional upgrade at order time (in exchange with the stock diffuser). The 2-piece diffuser is a MUST HAVE accessory. Cleaning the firepot is a messy pain the A** without the 2-piece diffuser. I didn't think I would need it, But I ended up ordering it about 6 weeks after receiving my YS640. I also highly recommend the direct grilling grates. I was able to get rid of my gas BBQ because the direct grilling feature works so well on the YS640.
I am currently using a Bradley Smoker, which is basically an electric oven with a smoke generator that makes tons of smoke, using special Bradley Smoker pucks (of compressed saw dust). A tall cylinder hold a stack of pucks, and the smoke generator pops a new puck into the oven every 20 minutes or so (when the pucks are about 80% burned). Managing temps is not as difficult as a stick burner, but nothing like advertised with these pellet burners (like the Rec Tec).
Similarly, online retailers like Amazon add to the cost of your products as well. When you order from Amazon the manufacturer has to pay a hefty fee to Amazon, even if the manufacturer of your grill ships it to you directly from their factory. So, while the grill may ship to you directly, Amazon usually takes around 15% of the total price, meaning that the manufacturer has to factor that cost into their margin as well.
One final word of caution when it comes to pellet pricing.  If you see a price on pellets that seems too good to be true, there’s probably a reason for it. If the pellets you got an amazing deal on creates twice as much ash, doesn’t burn as well, generates wild temp swings and ends up ruining a $65 brisket were they worth it?  What about if that flame out or temp swing cost you a whole pit full of meat and ruined the family reunion the next day?  We are all for saving money as much as anyone, but perspective is key here.  We are in no way saying that great pellets cannot be had for pennies per pound, but we are definitely saying, that if those pennies saved are not on a proven brand that you can trust then it’s probably not a bet worth taking.
Each of the alternatives to the Traeger Pro we’ve reviewed above is an excellent choice for an affordable pellet smoker. We think the Z Grills Master 700D is worth every penny and competes with the Traeger for even less money. We highly recommend you check it out. It has an even larger grill area, a larger hopper, burns just as consistently, and produces some perfectly smoked and grilled meats.
I bought my second Traeger Grill around Thanksgiving (my last one died after 3 months), spent most of the day assembling it only to find it didn't work. Customer service told me to reset the thermostat, I did and it shut down.  I did this routine a few more times with customer service and it kept shutting down, day after day.  Traeger reluctantly sent me a replacement grill and promised it would be Fully assembled (I have little use of my left hand and can't work with small parts)  Well it showed up unassembled in a bunch of little boxes. Customer service told me 4 times that they would call back with a local Traeger dealer to assemble it. Four promises to have someone come out and not even a phone call.
Due to the lower oxygen at 9200 FASL, I cannot keep the smoker hot and I cannot get it above 250 Deg. F. I seem to be limited due to the diameter of the smoker…just can’t get enough coals and air to get and maintain temps. Therefore, I want to buy a new smoker, on that will regulate temperature at temperatures of 200 – 450 deg F. Any experience or guidance for a smoker brand and type (wood pellet, charcoal, or electric) at high altitudes? i am looking for a smaller size smoker unit.
Renegade Pro is built to suit all your cooking needs; it can cook, braise, broil, char, sear, bake, smoke, roast, grill, and barbecue your food to that “melt-in-the-mouth” perfection. To bring about this versatility, it offers different temperature settings, such as “Hot and Fast” and “Low and Slow” that can be controlled using its Digital Pro Controller.

First impression was this thing isn't built like a mass produced unit, it's more like something you would expect from a master fabricator. The assembly instructions were incredibly detailed, and the way it was packaged made it really easy. It takes a little time to get temp steady for low smoking, but once it's there it seems to be pretty steady. So far absolutely impressed with everything about this cooker, and made in the USA!!!
In addition to providing savings, using an oak base also creates consistency. Different types of wood have different densities, burn at different rates, and produce different amounts of heat and smoke. For instance, cherry burns faster than hickory, so using 100% cherry you’d go through more pellets than if using 100% hickory. The addition of oak allows every flavor to burn at a similar rate and with a similar heat output, providing consistency from cook to cook.
When it comes to construction, few companies can beat Traeger. Its grills come with construction features like cast-iron grates with a clear and nontoxic coating that prevents food from sticking to the grill and fireboxes made from a similar material. Though Pit Boss grills feature similar elements, many look flimsy, and most will not keep up with your grilling and smoking demands.
If you live in an area where wood furnaces are used (not like down here in FL where a few heat strips will do the trick), you may also be familiar with pellet furnaces. In short, pellets compressed from sawdust and wood shavings fill a hopper and are then fed into a burn pot using an electric auger system. The auger, which is basically a long screw, delivers pellets to the burn pot based on the speed dictated by the unit’s thermostat.
×